Pre-Press arrow IHARA Color Imaging Division

IHARA Color Imaging Division

IHARA Color Imaging Division


Price:  Call for Pricing


 

IHARA Color Imaging Division

●Color Specification & Communication

Are you confident that you can reproduce the color of the posters printed 5 years ago in your workplace?

Quality of offset printing mainly depends on stability of consistent dot area and color reproduction in the whole printing process. Densitometers help to control density and dot area on printed matter digitally with easy operation.

Lithocam: Plate Reader

Webcam Dot Analysis system. Media includes Film, Plate and Printed Copy. Geometric measurements, dot gain calculator, screen angle/ruling calculation, JPEG, BMP or LCP formats. Direct RIP interface. Controls quality to all stages of the Litho industry, from film to conventional plate or CTP to printed copy.

Dot Inspector

The Dot inspector is the ideal tool to precisely see the various media outputs. Depending on the magnification, the inspector will enhance the image by illuminating the viewing area with different color LEDS.

Black & White Transmission Densitometer: T500

Useful for measuring film output from image setter and calibration of the equipment. Measurements include: Density, Positive or Negative Dot Area.

  • Black and White Transmission Densitometer.
  • Measures positive and negative film dot area plus densitometer density up to 6.OD. Includes a built-in light table, RS-232C aerial interface and powder supply. Filter: Visual. 

Spectrophotometer for Color Comparison

  • Used for quality control. Color formulation, color comparison. Measure anything. Paints, plastics
  • S600 series = 0/45º Geometry, for flat surfaces.
  • 45° Spectrophotometer. Color comparison and quality control. Measures color value , color difference.  
  • S650 series = Sphere Geometry, for curved surfaces.
  • Spherical Spectrophotometer. Color comparison and quality control. Measures color value difference. (Spherical Spin).
  • S655 series = Spherical spectrophotometer.
  • Color comparison and quality control. Measures color value, color difference. (Spherical Spex).  

Black and White Reflection Densitometer: R700

Density, Density Difference, Dot Area, Dot Gain, Print Contrast, Dot Analysis.

Color Reflection Densitometer with Plate Function: R710

Density, Density Difference, Optional Plate Reading Dot Area, Dot Gain.

Color Reflection Densitometer with Plate Function:R720

Measures density, density difference, dot area, dot gain and auto-function. Optional Plate Function.

Color Reflection Densitometer with Plate Function:R730

Measures density, density difference, dot area, dot gain, trap, print contrast, hue error, grayness, saturation, cast, brightness, auto-function and dot analysis. Optional Plate Function. 

Portable Spectrometer: S900 

Spectral reflectance, Chromaticity, (YZY, L*a*b*, etc), color difference, pass/fail function. I

Spectral Reflectance, Chromaticity, Color Differences, Density, Density Difference, Dot Area, Dot Gain, Print Contrast, Dot Analysis, Ink Trap, Print Contrast, Hue Error, Grayness, Saturation, Brightness, Plate Dot Area.

Spectrocam

The Spectrocam is a true spectrophotometer, measuring the complete visible spectral range of 380nm to 750nm. These spectral data give you the most accurate and detailed definition of color. In comparison to densitometers, spectrophotometers are more accurate, are less susceptible to media differences and measurements taken with different units are more consistent between each other. The Spectrocam delivers all the densities and colorimetric values based on true spectral data.

Gloss Meter (QIP) For measuring gloss on any surface.

IharaTM / X-RiteTM  Comparison Chart Simple cross reference.










Pre-Press | Press | Post-Press | Supplies | Used Equipment